Filter By:
- BMX (33)
- Bottom Brackets (190)
- Brakes/Levers/Pads (508)
- Cables (142)
- Cassettes/Freewheels (114)
- Chainrings (229)
- Chains (114)
- Cranksets (238)
- Show More Categories
- Derailleurs (154)
- Forks (132)
- Groups (23)
- Handlebar Grips/Tape (227)
- Handlebars (137)
- Headsets (147)
- Pedals (253)
- Saddles (228)
- Seatposts (85)
- Shift/Brake Combinations (61)
- Shifters (132)
- Shocks (31)
- Stems (101)
- Other (1499)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8\EC49/40/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 97g

The all new Blacklabel 800 Handlebar was designed with impeccable detail and quality. 15mm Rise, 800mm Width, 31.8 Clamp.

Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing.
- Forged dropouts with eyelets
- Chromoly tubing
- Cantilever mounts only (no disc mount)
- Axle to Crown Length: 395mm
- Brake Mount (Fork): Canti Studs
- Color: Black
- Crown Race: 30
- Front Axle: 10mm x 100mm
- Maximum Tire Clearance (Fork): 3.8
- Offset: 45mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill
- Steerer Tube Length (mm): 140
- Steerer Type: Straight
- Weight: 877g
- Wheel Size: 26-inch

A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 31.8mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (40mm), 92g (55mm), 99g (70mm), 104g (85mm)

- LEV INTEGRA'S internally routed cable significantly cleans up the look of your bike.
- With shifter cables, brake lines and lock out cables clamped and zip tied to your carbon fiber piece of art, mountain bike frames have begun to look like an IT guy's fantasy.
- Clear the clutter while benefiting from legendary LEV technology – now available in 175mm travel.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.

• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting
• CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength
• Three times stiffer than Team and Race rings
• Double chainrings bolts are included with all Race Face chainring sets

Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
- Machined 6061-AL with stainless steel pivot and bolt
- Anodized with laser-etched logo
- Integrated Flip-Off lever
- 30.0 clamp for most Salsa steel frames
- 30.6 clamp for most Salsa Scandium frames
- For smooth operation, lightly grease the bolt threads and keep all parts clean

- Precision-machined cable ferrules for improved braking and shifting performance
- A flat bottom on the inside prevents housing from pulling through ferrules.
- 4mm ID for use with most shifting cables
- 5mm ID for use with most braking cables
- 50-count bottle

$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push

$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains

$1.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.

$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
Page 1 of 155
Next page