Parts

absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible

Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring. There are 3 offsets: 0mm, 3mm, and 6mm - 49mm chainline, 0mm offset for BB30 short-spindle cranks - 52mm chainline, 3mm offset BB30 - 47mm chainline, 6mm offset for cyclocross and road cranks - 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost Notes for use with Fat Bikes: - If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. - If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)

The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life

Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - 49mm chainline - Use of a clutch-style rear derailleur is recommended

Designed to fit any 96 Symmetric BCD Shimano Cranksets. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Chainline is 49mm - Chainrings are threaded for standard M8 chainring bolts for no-nut installation

Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended

The Wolf Tooth 96 BCD chainring is designed to fit 4-arm Shimano XT M8000 and SLX M7000 cranksets.The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. - These rings fit on Shimano XT M8000 and SLX M7000 1x or 2x cranksets - Compatible only with Hyperglide+ chains - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with optimal chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles

Headset bearings for Wolf Tooth headsets. - Replacement bearings

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Compatible only with Hyperglide+ chains - For use with Shimano XTR M9100 series cranksets - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin

Tub of 25 Grade 25, 3/16" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub

Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually

Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag

Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 114g

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 115g

Replacement spacer pack for Wheels Mfg. 22/24mm (SRAM GXP) bottom brackets. Bearings sold separately. Pack Includes: - (1) - Silicone Dust Seal, 24mm ID Drive Side - (1) - Silicone Dust Seal, 22mm ID Non-drive Side - (1) - 24MM Wave Washer - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g